Adjustable structure design, which can be adjusted according to the wall
thickness, applicable to the wall thickness between 8 cm -24 cm (3-9in);
All the metal parts of the machine are made of stainless steel,
including supporting screws and nuts, which will not rust after
long-term use.
1:The laying thickness of the machine is at least 1 cm, if the thickness
needs to be adjusted, which can be adjusted by 4 pieces screws on both
sides .
2:The
maximum gap on both sides of the slurry is 1.4cm. If necessary, it can
be adjusted appropriately.
3:Spirit
level is installed at both ends of the machine,user can make reference
in operation.
4:The
whole machine is 73 cm long; 28 cm wide; 11 cm high; Machine weight 2 kg
(4.4lb).
5:Special
note: the machine must be cleaned after used to prevent cement
solidification from affecting the normal use of screws and rollers. |