|
|
|
110V Paste Filling Mixing Machine, Piston Filler Machine |
|
|
|
|
|
|
|
The semi-automatic
piston filling machine produced by our company has the advantages of
simple and reasonable structure, high precision, convenient cleaning and
simple operation. The contact area with the material is made of 304
stainless steel, in line with GMP requirements. The sealing parts are
made of PTFE and silica gel. They have the advantages of corrosion
resistance, aging resistance, high temperature resistance, good sealing
and so on. They are ideal filling equipment for food, pharmaceutical,
chemical, daily chemical, petroleum, pesticide and other industries.
This machine has two
methods, foot switch filling and continuous automatic filling; the two
filling methods can be switched arbitrarily. It is recommended to use
the foot switch for filling at the beginning. |
|
 |
1.This product is designed for all kinds
sauces with particles, pasty fluid, oil, and thin food products. It can
help you to fill a mount of quantitative sauces.
2.The filling volume range is between 100ml - 1000ml. And the machine
should connect air compressor for working. First time when you use the
machine , you should weigh the weight of output by adjusting and make
sure the volume you want.
3.This series of models need to be equipped with
external air compressor, air compressor exhaust should not be less than
0.1m3/min, equipped with pressure should be able to adjust to 0.4-0.9Mpa
range.
(Note1:We only sell
machines, do not match air compressors, customers need to buy their
own.)
(Note2: If you are not sure whether the material can be filled with this
machine, please consult before placing an order)
|
|
Product parameter: |
 |
|
 |
|
Voltage: |
110V/60Hz |
|
Material: |
The
surface is stainless steel |
| |
Pneumatic |
|
Filling volume (ml): |
100-1000ml |
|
Filling accuracy (FS) |
±0.5% |
|
Production capacity (cycle/min): |
5-15 |
|
Product size(Exterior
sizes): |
23.6"x15"x16.5"
(60x38x42cm) |
|
Machine body: |
39"x11"(99x28) |
|
Net weight: |
70kg
（154.3 lb） |
|
Applicable pressure (Mpa): |
0.4-0.9 |
|
|
Feature: |
|
|
|
 |
 |
|
 |
|
This machine is suitable for pepper paste,
peanut butter, fruit yogurt and other granular materials, a wide range
of application, filling material range. |
 |
|
(Refer to the right ring regulating valve and left
ring regulating valve in the figure above)
Adjust the speed of the cylinder moving piston rod:
The end near the moving rod (away from the handwheel) is the outlet
control valve (Adjust the speed of the cylinder moving rod to push out
the material);
The end away from the moving rod (near the handwheel) is the intake
control valve (Adjust the speed of cylinder moving rod recovery).
Clockwise downward, the discharge speed becomes slower;
Counterclockwise upward, the discharge speed becomes faster.
|
|
Product analysis: |
 |
|
Machines with two types of discharge
assemblies are shipped randomly
|
|
Product
safety precautions: |
|
This machine is suitable for pepper paste,
peanut butter, fruit yogurt and other granular materials, without straw.
To ensure safe production, please read the
following precautions carefully:
1. Use a power supply and air source that conforms to the requirements
of this machine . The stability of the air source must be maintained
under continuous working conditions.
2. Before disassembling, washing or repairing this machine, please be
sure to turn off the air source and power supply first.
3. The rear half of the machine (near the control buttons) and the lower
part of the machine frame are equipped with electrical control
components. Under no circumstances should the body be washed directly
with water, otherwise there will be danger of electric shock and damage
to the electrical control components.
4. After the power switch is turned off, there is still voltage in some
circuits in the electrical control of this machine. When repairing the
control circuit, please be sure to unplug the power cord.
5. Do not keep your eyes close to the filling head during work, pay
attention to personal safety.
6. Do not put your hand on the central axis of the cylinder during the
work process, pay attention to pinching your hands.
7. Before using materials for filling, it is best to clean the machine
with detergent first, and then clean it with clean water, so as to avoid
oil stains or foreign materials and materials mixing, which will lead to
waste of materials and damage to the machine.
When the paste filling machine is not working, please cover the
dustproof cover of the hopper to prevent dust or other debris from
entering the hopper and causing material waste and machine damage. |
|
Details: |
|
 |
|
 |
 |
|
Package
Include
(160420): |
 |
1x Filling Machine
1x Piezometer
1x Horizontal mixing bucket
1x Specification
1x Screw Driver
1x A set of hex socket screws
3x Spacer Sheet
2x Sealing ring
1x Power Cord
2x Spare regulating valve
1x Magnetic switch
1x Oil seal blue |
|
Advantages:
|
|
1. 304 stainless steel 60L large capacity, filling more
convenient.
2. One touch operation, convenient and simple.
3. Rotating and stirring, material stirring evenly,
suitable for precipitation, sticky materials.
4. The use of diameter head, particulate material
will not be blocked.
5. Imported motor, lasting and durable, strong
power.
6. Imported pump, can be customized according to the
volume of filling models.
|
|
Product display: |
 |
|
 |
|
Item include:110V 100-1000ml Paste Filling Mixing Machine*1,
Piston Filler Machine with Big Hopper*1 |
|
Item Number: 160420 |
|
|
You can make order
with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
|
