| Introduction
From screen print and printing process, the plate is various processes (the tension screen frame, cleaning, sizing, drying, print, scour ability version and mended edition.) waste time too much (the most general case, making a final screen frame needs at least 2-3 hours) if processing version to other company the fee is relatively high. Because almost screen printing machine cannot move and when they fixed screen frame normally it would be move maximum 2cm, right and life move maximum 5cm, Cause screen frame Plate pattern on the screen print and printing products in version must be relatively accurate. Otherwise, different situation can be make different worth such like on the low side or high side or right side or life side, bedplate to screen fixed position is not suitable, there may cause printing deviation, also has the potential to cause waste version.
In the other side, the plate cost very high, mostly buyer, need one screen can be repeatable, same cost, same material, make more designed in one plate, it should be save cost ,but normally one color screen printing machine it is fixed on bad plate, when screen print and printing peoples need adjustment screen frame is very difficult, one frame has design position also no working |
| • This machine is particularly
applicable to print kinds of printing products that need to set
on the bedplate, such as t-shirts, hold pillow, headrest, bag
,Non-woven bag, etc; |
 |
| • This machine is special
developed; the bedplate is 45*55 centimeters T - shirt type. |
| • The machine screen frame
chuck can make adjustment according to printing height within 2
cm, and it is suitable for printing 2cm thickness objects. |
| • Specially designed lift
screen frame control springs, the springs' tension can be
adjusted, so that users can according to the use of screen frame
size, screen frame weight to adjust the tension to make the
tension suitable |
|
