|
|
新建网页 1
新建网页 1
|
Dent Pulling
Machine 220V |
|
|
|
|
|
|
|
 |
|
Aluminum Dent Pulling
Machine 220V |
|
|
|
|
|
|
|
This welding machine can weld studs of various
materials of M3-M6. It hasmany advantages such assimple operation, short
welding time, little heat impact on the base material, no damage to the
basematerial surface, good welding quality, firmness, beautiful
appearance, and energy saving. lt is the most ideal equipment especially
in the maintenance of aluminumcar bodies. |
|
Product parameter: |
Voltage：220V
Instantaneous current：11000A
Rated power：1.5KW
Screw size：M3/4/5/6
Capacitance：12mF |
 |
|
Product analysis: |
 |
|
Operation method: |
1.First select the appropriate welding tip
according to the size of the stud, adjust the positioning screwin the
welding tip, then insert it into the gun head of the welding torch, and
tighten it carefully with awrench. Then insert the stud to observe, the
stud should be 5-8mm higher than the three supportrods of the welding
torch. Then connect the 220V power supply, and makethe welding machine
reliable grounding. Turn on the power switch, the digital meter displays
thewelding voltage, adjust the "voltage adjustment" knob to the
appropriate voltage according to the sizeof the stud used. The
specifications and voltage matching can be fine-tuned as follows:
| M3 |
M4 |
M5 |
M6 |
| 45V |
70V |
100V |
130V |
|
|
2. Remove oil and rust on the
workpiece to avoid spark splashing or weak welding due to poor contact.
3. The stud is installed in the gun mouth. Make the welding gun
perpendicular to the base material andexerts a slight pressure.
4. Press the micro switch on the handle of the torch, and the welding
will be completed after a "pop".
5. Adjust different voltages and observe the welding effect, subject to
the firmness of the welding andthe welding place is well connected and
flat.
6. Adjust the voltage according to the above experiment results and then
welding.
7. The larger the output voltage, the larger the diameter of the welded
stud.
8. As for the repairing of sheet metal, after welding, screw the pulling
ring on the stud, and use apulling tools with a thermal spray gun to
heat the damaged part and flatten the sheet metal. |
 |
|
Features: |
|
1. Adjustable pressure welding gun: Different rules of stud required
welding force is different, so the welding gun must be adjustable
pressure.
2. Pull frame aluminum material: more durable.
3. Current knob adjustment: knob adjustment is faster and more
convenient than button adjustment.
4. All copper transformer.
5. Professional workbench: The use of high-strength galvanized plate,
tools more convenient storage.
6. Cable 50m2 oxygen-free copper: discharge current is faster than
double lap iron.
7. Intelligent matching welding mode: fast arcing, deep melting pool,
solid welding.
8.12mF Large capacity capacitor.
|
|
Details: |
 |
 |
|
Steel Dent Pulling Machine 220V |
|
The
machine is the ideal product for dent pulling and straightening of low
thickness car body elements, such as bonnet, door, roof panel and wings.
This welding machine has many advantages such assimple operation, short
welding time, little heat impact on the base material, no damage to the
basematerial surface, good welding quality, firmness, beautiful
appearance, and energy saving. lt is the most ideal equipment especially
in the maintenance of steel car bodies. |
| Product
parameter:: |
Input Voltage: 220V
Power: 3KW
Welding Thickness: 0.4 ± 1.2mm
Instantaneous Maximum Current:6800A
Current: 77 Gears Operation
|
 |
| Product analysis: |
 |
|
Panel Operation: |
1.Connect the product to a suitable power
source, and then press the switch todisplay: function (left) power
(right).
2.To adjust the power intensity (current size), press the + or - button.
3.To change the function, press the function selection key.At this time,
you can usethe + and - buttons to select the function number.
4.Manual welding and intelligent welding:
---When using manual control, connect the torch switch connector and
switch theswitch to manual mode.
---When using smart mode, there is no need to disconnect the torch
switchconnector and switch the switch to smart mode.
|
Welding Operation: |
| The machine can be welded
manually/automatically, and the host automatically detects the
short-circuit condition of the welding gun, and a welding spot
is generated within 1 second. Disconnect the welding gun and the
welding part for 0.5 seconds, then the next point can be welded,
and others can be welded in sequence. When switches to manual
mode, use the gun switch to control welding. |
|
| Features: |
|
1. Using flexible voltage technology, it can still be welded firmly when
the voltage is low to 155V.
2. The welding joints are extremely small,the consumables loss is small,
no damage to the anti-rust paint behind the sheet metal, less damage to
the original bodywork and stronger welding.
3.Car dent puller has auto welding and manual welding two modes can be
switched at any time, easy to operate.
4. High strength thickened case with thickness up to 1.8mm. |
|
 |
 |
|
Different places have different Receptacles. Please notee
this plug and consult your electrician before purchase.
|
|
1*
Aluminum+Steel
Dent Pulling Machine 220V (239871) |
| |
|
You can make order
with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
|
