Note: There is no plug on the power cord. Please let a professional electrician conduct wiring operation.

2. During operation, never put hands or other body parts into the drum.

3. When the drum is rotating, keep away from the drive chain, belt, reducer and other moving parts.

4. Machine surfaces reach high temperatures during operation. Do not touch the drum exterior or areas near the heating elements to avoid burns.

5. Ensure the machine is properly grounded and periodically inspect the grounding connection.

6. Do not store flammable or explosive materials near the machine.

7. If the machine has a fault or produces abnormal noise, press the emergency stop button immediately and cut off power. Do not restart until the cause has been identified.

8 When inspecting or cleaning the machine, confirm that the main power has been disconnected and the machine has completely cooled down.

9. Electric heating elements are high-power components. Do not leave the machine running unattended for extended periods.

10. Periodically inspect electrical wiring and control components. Replace any aged or damaged parts promptly.

2. Uniform Drying: Combining drum rotation and shoveling plate stirring to avoid material caking and uneven heating. The final moisture content can be precisely controlled as required.

3. Environmental Protection: Compared to coal or oil-fired drying, electric heating produces no exhaust emission, offers precise temperature control, and supports a wide adjustable temperature range, making it ideal for environments requiring cleanliness and low pollution.

4. High Efficiency: The rotary drum minimizes the heat loss, achieving the higher thermal efficiency. It supports 24-hour continuous operation with large processing capacity, reducing the drying cost. The forward rotation of the drum is used for drying the materials, and the reverse rotation is used for discharging the materials.

5. Simple Operation: The integrated control panel simplifies parameter adjustment with automatic temperature control, making it easy for new operators to use. The machine has a low failure rate and low maintenance cost.

Control Panel

The control panel integrates all operating and monitoring components, and features clear digital display, precise temperature control, forward/reverse rotation control, mode selection, etc. Operators can start and stop the machine, set the temperature, and monitor the operational status through the control panel.
　

Fan System

The machine is equipped with one extraction fan rated at 370W. The fan removes the humid air generated in the drying process from the drum, accelerating the drying process and preventing material quality degradation due to excessive humidity.
　

Feed Hopper

The feed hopper is of a trapezoidal structure and is used to feed materials into the drum smoothly. The hopper is designed to allow convenient manual or assisted feeding, with an opening size suitable for conventional production requirements.
　

Transmission Assembly

The transmission assembly is of an integrated structure. The motor reduces the speed and increases the torque through the reducer, and then drives the drum to rotate via chains. The reducer and motor are mounted for easy routine maintenance and inspection.
　

Drying Drum

The drum is fabricated from rolled steel plate with welded seams. The interior surface is smooth and the exterior is insulated. Materials inside the drum tumble continuously as the drum rotates, making full contact with the heat radiated from the heating elements to achieve uniform drying.
　

Lifting Lugs

The standard lifting lugs are simple in structure and low in cost, can precisely transmit and disperse the lifting load, improve the lifting safety and efficiency. The lifting lugs can be compatible with shackles, lifting strips and other tackles and quickly achieve horizontal lifting and accurate positioning.
　

1. Connect the machine to the 220V 3-phase power supply with reliable grounding.

2. Turn on the fan switch to start the extraction fan.

3. Turn on the drum rotation switch to bring the drum into normal operation.

4. Turn on the heating switch. After the temperature display indicates normal heating, material may be fed into the drum. For first-time use, add material gradually in small batches to observe drying results and become familiar with machine performance.

5. During drying, adjust the heating temperature via the temperature controller according to material characteristics and drying requirements.

6. For discharge, stop the drum completely, then activate the reverse switch to gradually discharge the finished product.

7. After operation, thoroughly remove debris from inside the dryer. The interior may be rinsed with clean water; after rinsing, rotate in reverse to drain the wastewater.

8. To shut down the machine, stop feeding material into the drum. After the material inside the drum has been basically discharged, turn off the heating switch. Wait until the drum interior temperature drops below 80 degrees Celsius, and then turn off the fan and drum rotation. Finally, disconnect the main power supply.

Note: Do not directly disconnect all power while the machine is still at high temperature, as this may damage heating elements or affect the service life.

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.