Working Process
•T-shirt/Plain materials printing process:
① Place the material on working table, adjust
the pressure knob(3) get right pressure required.
② Connect power plug and
turn on power.
③ Set time & temp you want
with temp/time gauge (2) get required numbers.
④ The temp for heating plate (5) will start
to rise up, when it reaching temp you set, place the material on the working
table and close the handle (4).
⑤ The buzzer will sound when reaching time
you set, release the handle(4) and take out the material.
•Mug
printing process:
⑥ Clean
the mug surface, cut the image as per your design, printing size about height
9cm,length 20cm
⑦ Wrap
the mug with the cut image,
Make the image in the central and make it symmetrical both sides:
Stick the paper with thermal tape.
⑧ Put
the mug in the center of heating mat (7)
⑨ Adjust
the pressure for printing mugs, not too tight, or too loose and
close the
handle (6).
⑩ Turn
on power adjust the time/temp gauge (3) time 200S-300S,
temp about
180℃-200℃.
⑪ The
machine will sound an alarm automatically when reaching time, turn
off power , take out the mug from the heating mat (7)
⑫ Peal
off the paper. Put the mug S L O W L Y into cool water, then see a
photo mug is well done by yourself!
