|
Truck tire
changer Pneumatic portable tire changing machine |
|
|
|
|
|
|
|
 |
|
Product parameter: |
1.Working Power: Pneumatic
2.Working pressure: 0.8-1.2 Mpa
3.Rotating speed: 1 rpm/ 12 sec
4.Application Hub: Standard R16 R17.9-19.5 R22.5 inch series |
 |
|
Introduction of tire disassembly and assembly machine： |
|
1.The height of the tire disassembly machine is
low(specially designed according tothe diameter of the tire). It is a
bit labor-saving when placing the tire. It can be placed in place with a
light push. 2.The powertrain is equipped
with a muffler to reduce noise while the power is not affected. The
fuselage is small in size and light in weight, and can be moved by one
person, so that the tire changing operation can be realized when going
out.
3.The shovel tire trowel undergoes multiple
processes such as cutting, tempering,rough grinding and fine grinding.
The shovel tire shovel has high strength and does not deform. The
surface smoothness of the shovel head reaches the mirror level. The
shovel tire is guaranteed not to hurt the tire mouth.
4.The angle design of the tire loading arm has
been simulated by the computer for many times. The design angle is very
reasonable, and the tirewill not be injured during loading.
5. The design of the tire fixing point is
reasonable，and the tire can be fixed only by gently rotating,
eliminating the trouble of disassembling and screwing, and savingtime. |
|
Composition of tire disassembly and
assembly machine: |
 |
|
Tire loading operation method： |
|
 |
|
Method of tire dismantling operation： |
 |
|
Use warning： |
1. Before removing the tire and installing the
tire, the grease must be evenl applied on the tire mouth, otherwise it
will easily hurt the tire mouth.
2. Before tying the tire, use a shovel to shovel the tire mouth, and
squeeze the tire rod as flat as possible, so that the shovel head and
the steel ring have a gap of 0.5 cm. Damage the device.
3.The machine should not be exposed to rain to avoid damage.
4.The air compressor should be drained regularly to prevent a large
amount of water from flowing into the motor and causing damage to the
machine. |
|
Maintenance methods： |
|
1. After using it a few times,
be sure to check the tightening of each fixing screw. Each screw must be
re-tightened. Regular inspections are required in the future to prevent
the screws from loosening and damaging the device.
2. The tire picking device and tire mounting device should be smeared
by the police to prevent rust.
3. Regularly fill with wind gun oil.
4. Maintenance of the machine head: after removing the inner connecting
shaft, add grease into it and turn the machine to lubricate the gears. |
|
Details: |
16-inch tires are relatively small and require
flanges.
Tires in the 17.5-19.5 inch range include
205/215/235/245.
Most large trucks and trailers use 22.5 inch
steel rings for tires. |
 |
|
Product display: |
 |
 |
 |
|
Item Number:
1*R16 R17.9-19.5 R22.5 truck tire changer Pneumatic
portable tire changing
machine (239850) |
|
|
You can make order
with no worry.
Any concerns just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
